The quest for highly sensitive QCM humidity sensors: the coating of CNT/MOF composite sensing films as case study

K.N. Chappandaa, O. Shekhahb, O. Yassinea, S.P. Patolea, M. Eddaoudi, K.N. Salama
Sensors and Actuators B: Chemical, volume 257, pp. 609-619, (2018)

The quest for highly sensitive QCM humidity sensors: the coating of CNT/MOF composite sensing films as case study

Keywords

Metal-organic framework, Composites, CNT, Humidity, Sensors

Abstract

​The application of metal-organic frameworks (MOFs) as a sensing layer has been attracting great interest over the last decade, due to their uniform properties in terms of high porosity and tunability, which provides a large surface area and/or centers for trapping/binding a targeted analyte. Here we report the fabrication of a highly sensitive humidity sensor that is based on composite thin films of HKUST-1 MOF and carbon nanotubes (CNT). The composite sensing films were fabricated by spin coating technique on a quartz-crystal microbalance (QCM) and a comparison of their shift in resonance frequencies to adsorbed water vapor (5 to 75% relative humidity) is presented. Through optimization of the CNT and HKUST-1 composition, we could demonstrate a 230% increase in sensitivity compared to plain HKUST-1 film. The optimized CNT-HKUST-1 composite thin films are stable, reliable, and have an average sensitivity of about 2.5×10−5 (Δf/f) per percent of relative humidity, which is up to ten times better than previously reported QCM-based humidity sensors. The approach presented here is facile and paves a promising path towards enhancing the sensitivity of MOF-based sensors.

Code

DOI: 10.1016/j.snb.2017.10.189

Sources

Website PDF

See all publications 2018